View Single Post
Old 09-26-2020, 11:14 PM   #8
Tom Endy
Senior Member
Tom Endy's Avatar
Join Date: May 2010
Location: Southern California
Posts: 2,679
Default Re: Distributor Removal Tip Re Ignition Cable Clamp

If you take the clamp off, replace it with a spacer the same thickness or replace the extra long stud with a shorter one, otherwise you can bottom out on the threads and not have that head bolt tight and you will blow a head gasket in that area.

Tom Endy
Tom Endy is online now   Reply With Quote