The Ford Barn - View Single Post

Tom Endy · 09-03-2012, 03:49 PM

If you are able to turn the engine over to get a compression check it may be that you only blew a head gasket between 1&2. FelPro R3 head gaskets are very narrow beteen 1&2 and 3&4, and that is where they generally blow.

Tom Endy

09-03-2012, 03:49 PM	#3
Tom Endy Senior Member Join Date: May 2010 Location: Southern California Posts: 3,131	Re: Bad Day If you are able to turn the engine over to get a compression check it may be that you only blew a head gasket between 1&2. FelPro R3 head gaskets are very narrow beteen 1&2 and 3&4, and that is where they generally blow. Tom Endy