The Ford Barn - View Single Post

Galaxiedan · 06-04-2018, 07:44 PM

Bob, Im not totally sure but I think it has a newer 6v regulator in place of the factory cut out.

As I dig deeper it looks like some parts were changed from stock like the cutout, water pump, fuel bowl, ect.

I found a place online that sells a regulator/cutout that makes the stock generator charge at 12v. If that doesnt work I'll be putting an alternator on.

New problem is starter stays on, took assembly off starter trying to figure out what returns foot button after pressing? No springs visible? Maybe its a cheap repo?

06-04-2018, 07:44 PM	#12
Galaxiedan Junior Member Join Date: May 2018 Location: Citrus Springs, FL Posts: 7	Re: 30 model A water pump ID help Bob, Im not totally sure but I think it has a newer 6v regulator in place of the factory cut out. As I dig deeper it looks like some parts were changed from stock like the cutout, water pump, fuel bowl, ect. I found a place online that sells a regulator/cutout that makes the stock generator charge at 12v. If that doesnt work I'll be putting an alternator on. New problem is starter stays on, took assembly off starter trying to figure out what returns foot button after pressing? No springs visible? Maybe its a cheap repo?