The Ford Barn - View Single Post - Flathead Alum Heads-Block Alignment

philipswanson · 11-02-2019, 09:56 PM

I wouldn't use aluminum. I would machine some bronze bushings and press them into the head. Then ream them to fit the bolts. Just like king pins. Problem solved.

11-02-2019, 09:56 PM	#12
philipswanson Senior Member Join Date: Oct 2015 Location: Bonita, CA Posts: 1,374	Re: Flathead Alum Heads-Block Alignment I wouldn't use aluminum. I would machine some bronze bushings and press them into the head. Then ream them to fit the bolts. Just like king pins. Problem solved.