Quote:
Originally Posted by shew01
As I said, I have a business card between the point contacts for testing; so, the points are always open for now. However, I’ve tested the point arm and the stationery contact, and neither show 6 volts.
For what it’s worth, I’ve been using the driver side junction box wing nut stud for my hot wire during testing. Both wing nut studs appear to be always hot. Would testing from a coil wire be any different?
Sent from my iPhone using Tapatalk
|
I don't understand that.
Yes both those studs are hot, should be.
To check for power, one lead goes to a good ground while the other lead is poked around looking for power. Once the power is found the light will light or the meter will show it. It won't work using 2 sources of power.