The Ford Barn - View Single Post

tomcarman · 04-13-2020, 09:03 PM

If indeed it is a '35, that embossed number will begin with a "48-" prefix. Can you find that embossed number?

Thank you for the insight. I looked inside and sure enough there was a cast serial #, albeit obscured. I reached in there with a small wire wheel on the cordless and got a lot of crap off it. Upon inspection all I could identify was the veritical portion of what should have been the 4, I could definitely identify the 8 and the dash ( - ). Beyond that it appears the casting was made on a Monday. Think I'll just save it as a wall hanger as it appears there's no interest for it. I'd like to thank you for the excellent info and photos.

04-13-2020, 09:03 PM	#12
tomcarman Senior Member Join Date: Feb 2017 Location: Rochester Wa Posts: 574	Re: Part ID If indeed it is a '35, that embossed number will begin with a "48-" prefix. Can you find that embossed number? Thank you for the insight. I looked inside and sure enough there was a cast serial #, albeit obscured. I reached in there with a small wire wheel on the cordless and got a lot of crap off it. Upon inspection all I could identify was the veritical portion of what should have been the 4, I could definitely identify the 8 and the dash ( - ). Beyond that it appears the casting was made on a Monday. Think I'll just save it as a wall hanger as it appears there's no interest for it. I'd like to thank you for the excellent info and photos.