Re: I could not sit idle, have a new project
Been away at a metal shaping gathering and got some work done on the aluminum body work. These are some picture of the progress on the upper tail section panel. It still needs to be welded together and then have the finish work done. Been busy getting ready for Hershey
3wc42 004.jpg
3wc42 030.jpg
3wc42 032.jpg
3wc42 035.jpg
3wc42 036.jpg
3wc42 037.jpg
3wc42 049.jpg.
__________________
Uncle Bud says "too soon old, too late smart!"
|