Quote:
Originally Posted by Chris Haynes
By using a '32-'36 front axle and a Posies reversed eye spring I lowered my car 3". You either have to heat and bend the tie rod arms on the spindle or use Jeep tie rod ends to clear the wishbone.
Posies can also sell you a spring that will drop the car 2" by its self.
|
I'm curious about the Jeep Tie Rod ends solution? I have a '32 front axle which drops the front about 1.5 inches, but on sudden bumps, the tie rod taps the chassis and I haven't found a solution to dropping the tie rod 1.5 inches? Any other suggestions that doesn't include goose necking the tie rod?