Re: MiG help
Quote:
Originally Posted by G.M.
That's very hard to believe. G.M.
|
I have 2 machines, one setup for flux core and one for gas, and have never had a wire welded to the tip on either one. (suppose that if you get too close to the work it will happen) (probably just jinxed myself for the next time I do some welding)
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
Last edited by 51 MERC-CT; 01-21-2021 at 01:40 PM.
|