The Ford Barn - View Single Post

duke36 · 03-18-2019, 10:31 AM

Also , if using the F150 or other setup, check the caster angle at the axle (4-5 deg per later Ford service specs) with the AA housing and if Float A Motor mounts. The radius ball clamp may need some fine tuning.

03-18-2019, 10:31 AM	#25
duke36 Senior Member Join Date: Jun 2015 Posts: 1,414	Re: F 150 OD trans Also , if using the F150 or other setup, check the caster angle at the axle (4-5 deg per later Ford service specs) with the AA housing and if Float A Motor mounts. The radius ball clamp may need some fine tuning.