The Ford Barn - View Single Post - T-5 5 speed trans VS Mitchell overdrive

Doug in Maryland · 08-28-2019, 11:42 AM

Has anyone here put a T5 in an AA or know of anyone who has? There is more room behind the stock transmission, 4-speed or 3-speed, but I don't know if it would be enough room to not have to fabricate an open drive shaft conversion as you might with an A. I seem to remember that Mitchell made an overdrive for the bevel gear rear axle AA's but I haven't heard much about that lately.

08-28-2019, 11:42 AM	#20
Doug in Maryland Senior Member Join Date: May 2010 Posts: 100	Re: T-5 5 speed trans VS Mitchell overdrive Has anyone here put a T5 in an AA or know of anyone who has? There is more room behind the stock transmission, 4-speed or 3-speed, but I don't know if it would be enough room to not have to fabricate an open drive shaft conversion as you might with an A. I seem to remember that Mitchell made an overdrive for the bevel gear rear axle AA's but I haven't heard much about that lately.