Quote:
Originally Posted by Jim/TX/GA
Yes, the tie rod length changed in September, 1928, at the same time that the spindles arms were slightly redesigned. It required lengthening the threaded tie rod from approximately 42-3/4" to 43-1/2".
So it sounds like your '29 roadster may be fitted with '28 spindle arms by a previous owner.
I hope this helps. Feel free to PM or email me with follow up.
|
Jim,
Off the top of my head..I think your backwards, best guess.
The arms that are closer too the backing plates take a longer tie rod..
Dudley