The Ford Barn - View Single Post

Tudortomnz · 02-19-2019, 08:43 PM

Thanks for the replies. All good info which I will look into.
I have looked through Alloy Artifacts but nothing on Canadian tool makers.
Also considered Eberhard but there were many toolmakers in Canada.
For '28-'29, Canada used mostly US toolmakers, but late production sees mostly local sourced items.
If anyone has a spare kit wrench [the larger one] marked E encircled, I would be interested in buying . Cheers - Tom in NZ.

02-19-2019, 08:43 PM	#9
Tudortomnz Senior Member Join Date: May 2010 Location: Canterbury, New Zealand Posts: 1,242	Re: Canadian tool mark Thanks for the replies. All good info which I will look into. I have looked through Alloy Artifacts but nothing on Canadian tool makers. Also considered Eberhard but there were many toolmakers in Canada. For '28-'29, Canada used mostly US toolmakers, but late production sees mostly local sourced items. If anyone has a spare kit wrench [the larger one] marked E encircled, I would be interested in buying . Cheers - Tom in NZ. Last edited by Tudortomnz; 02-19-2019 at 09:46 PM.