Quote:
Originally Posted by jojofilo88
Hey guys,
Any alternate methods to getting the pinion off? I'm replacing both ring and pinion and can't get it off! The whole drive shaft keeps spinning when I try removing the but with a pipe wrench!
From what I've read you can try pulling the whole deal off or you can unbolt the two nuts on the shart over the pinion. I don't have wrenches that big (2+") so I'm really struggling, although I do have a 2/3 pronged puller.
I'm planning on going to find wrenches I'm the morning but thought I'd check for more ideas from you fine folks.
Thanks!
Joe
|
I used one purchased special wrench and one large cresent wrench from harbor freight.