Thread: oil pump
View Single Post
Old 12-31-2019, 02:15 PM   #47
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,529
Default Re: oil pump

Quote:
Originally Posted by codeplus View Post
Update: The guy that built the motor installed the gear on the cam that runs the oil pump
backwards. Surprised I had oil pressure to start at all. Not good.




I think you mean the idler gear between the oil pump gear and the cam gear was installed backwards. That would cause a fast failure of the drive from the cam to the pump since almost no gear mesh is made.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
Ronnieroadster is offline   Reply With Quote