The Ford Barn - View Single Post

supereal · 01-07-2020, 03:50 PM

It is OK to spray both sides of the spring leaves, except for the exposed surfaces on the top and bottom of the assembled spring, where it is exposed to road dirt. The primer will not interfere with the Slip Plate. You can insert spring liner, if you prefer. It is available from C&G (800/266-0470) in 30 foot rolls, $12-13. his will require one spring leaf to all the tie bolt and clips to fit. Have the width of your spring when ordering, as the liner comes in 4 different widths.

01-07-2020, 03:50 PM	#2
supereal Senior Member Join Date: Jul 2014 Location: Iowa Posts: 1,634	Re: Leaf Spring Prep... It is OK to spray both sides of the spring leaves, except for the exposed surfaces on the top and bottom of the assembled spring, where it is exposed to road dirt. The primer will not interfere with the Slip Plate. You can insert spring liner, if you prefer. It is available from C&G (800/266-0470) in 30 foot rolls, $12-13. his will require one spring leaf to all the tie bolt and clips to fit. Have the width of your spring when ordering, as the liner comes in 4 different widths.