Quote:
Originally Posted by Kube
Also, there are oils in steel wool...
The powder finisher can easily coat them once again without completely stripping them.
Lastly, it appears authenticity is not important to you. Am I correct?
If so, be aware that gloss black is correct for chassis parts including the frame.
|
Actually yes . I am concerned about finishes . but this question was for another project of mine where the suspension trailing must be semi-gloss and the powder coater made it gloss!
Hoping that the advise regarding "scotch briting" the gloss, priming and then painting semi-gloss paint will work as I do not want to re-powder coat it.