The Ford Barn - View Single Post

msbrown6 · 11-11-2017, 04:50 PM

Thanks Bob - Sure appreciate the advice. I ended up stripping a nut on the bolt - so I ended up just smacking the bolt with the hammer. After about 20 good hits, it popped free. Thanks again!

11-11-2017, 04:50 PM	#21
msbrown6 Junior Member Join Date: Aug 2016 Location: Marsing, ID Posts: 17	Re: Fan Blade Replacement Thanks Bob - Sure appreciate the advice. I ended up stripping a nut on the bolt - so I ended up just smacking the bolt with the hammer. After about 20 good hits, it popped free. Thanks again!