The Ford Barn - View Single Post

Tom Wesenberg · 08-06-2013, 08:08 PM

Remember the brush holders need an insulating washer ON EACH SIDE of the motor frame. Also make sure the brushes slide freely in the holders. I had a deformed holder from a too long cover screw running into it.

08-06-2013, 08:08 PM	#4
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Horn reassembling issues Remember the brush holders need an insulating washer ON EACH SIDE of the motor frame. Also make sure the brushes slide freely in the holders. I had a deformed holder from a too long cover screw running into it.