The Ford Barn - View Single Post

Tinker · 09-12-2019, 08:11 PM

I used a 57 distributor on a 292 w ecz-g heads with a large two barrel holley. 350 cfm. Holley has the same 2 barrel with 500 cfm. Option of no electric choke. Circletrack
https://www.summitracing.com/parts/h...IaAg9aEALw_wcB

Decent info here.
http://ford-y-block.com/

Also here.
http://yblockguy.com/

Try the 54 up forum also. Sal can rebuild your teapot if you go that way.

09-12-2019, 08:11 PM	#9
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: 292 V8 carb alternative I used a 57 distributor on a 292 w ecz-g heads with a large two barrel holley. 350 cfm. Holley has the same 2 barrel with 500 cfm. Option of no electric choke. Circletrack https://www.summitracing.com/parts/h...IaAg9aEALw_wcB Decent info here. http://ford-y-block.com/ Also here. http://yblockguy.com/ Try the 54 up forum also. Sal can rebuild your teapot if you go that way. Last edited by Tinker; 09-12-2019 at 08:22 PM.