The Ford Barn - View Single Post

wensum · 07-26-2012, 03:43 PM

Macs Speed shop here in New Zealand makes an alloy bell housing to take the F150 box and this also has the clutch shaft for conventional mounting of the pedals.I believe this is marketed in the States but I'm not sure who by?
Also it should be noted that the spline on the F150 box is shorter than the model A and a special offset clutch plate is require to engage the spline.
I will be running mine with an open prop shaft conversion, but with a hotted up motor and serious driving I believe the diff attenpts to rotate and an arm off the diff is required to counteract this?

07-26-2012, 03:43 PM	#145
wensum Senior Member Join Date: Apr 2011 Location: New Zealand Posts: 444	Re: F150 tranny with overdrive Macs Speed shop here in New Zealand makes an alloy bell housing to take the F150 box and this also has the clutch shaft for conventional mounting of the pedals.I believe this is marketed in the States but I'm not sure who by? Also it should be noted that the spline on the F150 box is shorter than the model A and a special offset clutch plate is require to engage the spline. I will be running mine with an open prop shaft conversion, but with a hotted up motor and serious driving I believe the diff attenpts to rotate and an arm off the diff is required to counteract this?