Quote:
Originally Posted by Dirtrack49
Thanks everyone for your help.
And Benson, thanks for checking on the sizes of pins available from Bert's. I measured the pin again and I believe that the .245 pin is correct.
Duke36, if I decide to go with the mirrors for the wind wings, do they have a lot of adjustment so that you can place the wings in different positions?
Once again, thanks again for everyone's input.
Tom L.
1930 Town Sedan
|
See the vendors mirrors selections; they just clip on to the glass with rubber gasket and can be positioned vertically. They also can be adjusted around the ball pivot. Down side is that windwing brackets have to be drilled and screwed into the door skin.