Thread: Remove sector needle bearings
View Single Post
Old 01-07-2020, 06:39 PM   #9
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,431
Default Re: Remove sector needle bearings
I would fabricate a push tool with a pilot end to help keep things straight going in or out with them. Needle bearings are kind of dainty.
Last edited by rotorwrench; 01-08-2020 at 10:50 AM.
rotorwrench is offline   Reply With Quote