Sponsored Links (Register now to hide all advertisements)
Replaced the whole regulator with an unbranded one , old one was “vintique” . Darn they are ever so slightly different , meaning i fixed my glass track on to suit “vintique” and the new one doesnt quite match so jams going up when the arms reach the end and turn to go up. Yes I could shorten both arms a little ,but no wont do that.
Any way , thought I would splurge a little and buy a $14 regulator cup and small gear etc.
So the long story is the $14 fix worked. So it was the small internal spring in the regulator cup that caused the initial problem .