Quote:
Originally Posted by Ian1932
I understand. I see what your saying. I just feel guilty picking their brains and calling or requesting information without any intentions of buying...Or just getting their info and copying it. I did see a few of their products and they are thought out very nicely! Im sure they put a ton of time and research into their products!
|
Ian...You're 90% there with the pedals and pedal bracket that you already have. With those pieces bolted in place, and figuring the dimensions on your newly-modified bracket to place the M/C pushrod just low enough to clear the crossmember, you should be able to calculate the dimensions (
YOUR calculations) for a SIMILAR bellcrank and cross-shaft shown in the following picture. I wouldn't feel in the least guilty about going forward with that general idea. DD