The Ford Barn - View Single Post

deuce lover · 08-20-2019, 10:58 AM

The block with the 4 holes mounts on top the bracket in the body.Take one of the "C" shaped arms off the lid and with the block in place and slot of the block facing front(as per Marts pic) put the "C" shaped piece in the block and use a bolt to pivot in it.Its got to swing in that block and with the parts off the lid is easier to figure it out.I have done this 3 times but its been a few yrs so can't remember it all in detail.

08-20-2019, 10:58 AM	#2
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,307	Re: 1934 Ford 3 Window Coupe TRUNK Hinge The block with the 4 holes mounts on top the bracket in the body.Take one of the "C" shaped arms off the lid and with the block in place and slot of the block facing front(as per Marts pic) put the "C" shaped piece in the block and use a bolt to pivot in it.Its got to swing in that block and with the parts off the lid is easier to figure it out.I have done this 3 times but its been a few yrs so can't remember it all in detail. Last edited by deuce lover; 08-20-2019 at 11:50 PM.