View Single Post
Old 01-14-2020, 01:03 AM   #18
Talkwrench
Senior Member
 
Talkwrench's Avatar
 
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,405
Default Re: Vibration - rumble

Quote:
Originally Posted by 35ragtop View Post
Rob,
I had a similar experience in my 38 pickup. It turned out to be the bearing behind the speedo drive. This roller bearing just pealed off the hardening . It was a repo bearing. I subsequently replaced it with a good NORS from Obsolete (Barnfind08). No further issues with that part at least.
Dave
I know the bearing I replaced it and the sleeve probably just over 5 years ago when I did the diff.... But as I go from back to front I guess I'll start finding it
__________________
"Came too close to dying to stop living now!"
Talkwrench is offline   Reply With Quote