View Single Post
Old 01-14-2020, 12:02 AM   #17
35ragtop
Senior Member
 
35ragtop's Avatar
 
Join Date: Dec 2010
Location: Gold Coast , Australia
Posts: 201
Default Re: Vibration - rumble

Rob,
I had a similar experience in my 38 pickup. It turned out to be the bearing behind the speedo drive. This roller bearing just pealed off the hardening . It was a repo bearing. I subsequently replaced it with a good NORS from Obsolete (Barnfind08). No further issues with that part at least.
Dave
35ragtop is offline   Reply With Quote