View Single Post
Old 01-13-2020, 07:02 PM   #13
deuce_roadster
Senior Member
 
deuce_roadster's Avatar
 
Join Date: Oct 2011
Location: Shelton, WA
Posts: 2,529
Default Re: Vibration - rumble

That hub turns awfully easy, is the other one turning the opposite direction as it should? I don't think I have ever put one of these rear ends together where going through the spider gears it turned with so little force.
Put the trans in neutral and have someone else turn the other side the same as you and see if the noise is different. If both hubs can be turned the same direction, the ring gear/driveline/u joint will be turning, might give you a different noise. The safety bracket is clearly rubbing on the hub pictured, so that is some of the grinding sound.
deuce_roadster is offline   Reply With Quote