View Single Post
Old 01-12-2020, 08:03 PM   #15
Talkwrench
Senior Member
 
Talkwrench's Avatar
 
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,406
Default Re: Rebuilt motor start up

Quote:
Originally Posted by Brian View Post
My opinion....people say that with new cam and lifters, the motor needs to be run at 2000 RPM for 20 minutes in order to run those components in.

New rings need to be run under load to get them bedded in correctly.
Therefore, achieve both jobs at once; get vehicle running, then DRIVE it.
Thats what I did.. load it up and run it reasonably hard. Back yourself if you have done the work !
__________________
"Came too close to dying to stop living now!"
Talkwrench is offline   Reply With Quote