View Single Post
Old 01-11-2020, 10:56 PM   #9
Senior Member
jrvariel48's Avatar
Join Date: Jan 2012
Location: New Jersey
Posts: 1,006
Default Re: Rebuilt motor start up

Originally Posted by Jim in Wisconsin View Post
It'll run on gravity feed. You'll need a radiator for sure. I've run motors on stands - they get hot in just a few minutes.
It doesn't matter if the clutch is on it or not, as long as the flywheel in on. Make sure the flywheel bolts are tight!
Thanks Jim, I can get that set-up in a jiffy!
Thank you
jrvariel48 is offline   Reply With Quote