Sponsored Links (Register now to hide all advertisements)
Inspect the flywheel and determine the bolt pattern and pattern size. Could be 9, 9.5,10 or 11".
Most likely it has the "Long" style clutch. I agree with the above, contact Fort Wayne Clutch. They have the whole package at a very reasonable cost, including the pilot bearing, throw out bearing, alignment tool, disc and plate. Rough up the flywheel surface with a scotchbright if you find no reason to need resurfacing the flywheel. Most folks would balance the pressure plate and flywheel as well, on a budget you may be ok without that.
Good luck with your project, and have fun.