The Ford Barn - View Single Post

The Master Cylinder · 04-07-2019, 04:55 PM

This is on your "A"? Not sure of the M/C, but looks to be leaking pretty good (bad?). It looks like an early Mustang but could be any 60's Ford with a single M/C. Not sure on the Power Booster either. It does have the four mounting studs common with Ford Boosters.

Not sure power brakes are even needed on a Model A. With the 12" drum it should really STOP.

04-07-2019, 04:55 PM	#3
The Master Cylinder Senior Member Join Date: Aug 2012 Posts: 880	Re: Help Identifying Brake Parts This is on your "A"? Not sure of the M/C, but looks to be leaking pretty good (bad?). It looks like an early Mustang but could be any 60's Ford with a single M/C. Not sure on the Power Booster either. It does have the four mounting studs common with Ford Boosters. Not sure power brakes are even needed on a Model A. With the 12" drum it should really STOP. __________________ The Master Cylinder Enjoying life at the beach in SoCal...