The Ford Barn - View Single Post - Red-Lite Misery

Patrick L. · 06-02-2021, 04:34 PM

Fix what you have. If it is the carburetor, it should be an easy fix. Its a simple carburetor. Clean it, a tag wire thru the passages followed with a can of Deep Creep spray and some air should work. Set the float level. Adjust the idle mixture and speed, set the GAV at 1/4-3/4 turn out and it should be good to go.

First make sure there is not an air leak and the ignition system is good.

06-02-2021, 04:34 PM	#2
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Red-Lite Misery Fix what you have. If it is the carburetor, it should be an easy fix. Its a simple carburetor. Clean it, a tag wire thru the passages followed with a can of Deep Creep spray and some air should work. Set the float level. Adjust the idle mixture and speed, set the GAV at 1/4-3/4 turn out and it should be good to go. First make sure there is not an air leak and the ignition system is good.