Thread: Carb Issues
View Single Post
Old 05-07-2019, 01:17 PM   #15
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
Default Re: Carb Issues

Quote:
Originally Posted by farmerjohn39 View Post
Hi BillCNC
In the last week I purchased a NEW " Air Balanced Carburetor" from Synders, just so I could install a air filter on the carburetor' and I have nothing nothing but problems with the new carburetor.
The first one Synders sent me leaked gas through the casting ( I think it was a pin hole in the casting) Called Synders they sent me out a replacement for the defective one.
The second new carburetor from Synders didn't leak gas, but it wouldn't let the car run over 30 mi. per. hr. also it wouldn't run or idle down unless the GAV was open 1 to 1 1/4. I removed the air filter and that didn't help so I gave up and put the old stock ZENITH back on w/ no filter the motor ran ok. (if its not broke don't fix until it is broke)

I returned both carburetors to Synders and canceled my order. Snyders quality has been very good, I think they just got a bad batch from there supplier.

Regards farmerjohn
From what I have heard, most of the new carburetor parts from vendors have issues (especially leaks). And the new carbs are the worst for quality. Have to be made overseas. When it comes down to it, most OEM parts are better and longer lasting than the junk that is being sold today.
__________________
"The more things change, the more they stay the same."
chrs1961815 is offline   Reply With Quote