The Ford Barn - View Single Post

Lawrie · 11-06-2019, 08:14 PM

I use an old crankshaft ,cut off at the start of the rear main, hold it by the rear main part and clock it up in the 4 jaw,then bolt the flywheel to it.
Lawrie

11-06-2019, 08:14 PM	#4
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,221	Re: Clutch chatter.... I use an old crankshaft ,cut off at the start of the rear main, hold it by the rear main part and clock it up in the 4 jaw,then bolt the flywheel to it. Lawrie