The Ford Barn - View Single Post - Need best way to remove diff. pinion shaft assembly

Ken/Alabama · 01-02-2023, 10:52 PM

Towards the ring gear. Also put a wrap of electrical tape on the tapered end of the axle covering the keyway slot. That will prevent the sharp edge of the keyway from cutting the new seal as it passes through.

01-02-2023, 10:52 PM	#12
Ken/Alabama Senior Member Join Date: May 2010 Location: Alabama Posts: 3,270	Re: Need best way to remove diff. pinion shaft assembly Towards the ring gear. Also put a wrap of electrical tape on the tapered end of the axle covering the keyway slot. That will prevent the sharp edge of the keyway from cutting the new seal as it passes through.