The Ford Barn - View Single Post

Chuck Sea/Tac · 04-12-2020, 10:26 PM

You really should not use the fan blade to turn the engine over. Use a crank, a special wrench venders sell , or a socket with the extension through the crank hole.
You can also use the starter to bump it.

04-12-2020, 10:26 PM	#10
Chuck Sea/Tac Senior Member Join Date: May 2010 Location: Between Seattle & Tacoma Posts: 2,354	Re: crank pulley issue You really should not use the fan blade to turn the engine over. Use a crank, a special wrench venders sell , or a socket with the extension through the crank hole. You can also use the starter to bump it.