Quote:
Originally Posted by Ol' Ron
I don't think you understand the question. How much does it coust to rebuild the engine. Take it to a machineshop and have it rebuilt "STOCK"
|
I don't think stock is far off from the $3,000-$4,000 someone mentioned.
If your buddy has an already disassembled block, that may get it to be on the lower end of the $3,000-$4,000 range. I had 15 hours getting the studs out of my 99A block.
That is assuming lower quality pistons are used and everything else can be reused or reconditioned.
Machine work alone just to clean, test, and bore the block is going to be around $700-$900 depending where he's located.