View Single Post
Old 10-17-2017, 03:43 PM   #16
Ian NZ
Senior Member
 
Ian NZ's Avatar
 
Join Date: May 2010
Location: Taranaki, New Zealand
Posts: 921
Default Re: 1932 Detroit Lubricator carburettors.

David G, What do you set the float level at, the service instructions it says 1-3/16 inch plus or minus 1/16 inch do you find that correct and another thing I am repacking the metering pin 18- 9525 assy gland with two packings with 1/8' square graphite packing it looks as if it is leaking there and is that correct.
Ian NZ is offline   Reply With Quote