Thread: Cap and Comp Jet Helicoil repair
View Single Post
Old 01-24-2020, 12:40 AM   #23
TinCup
Senior Member
 
TinCup's Avatar
 
Join Date: May 2010
Location: OKC / Tonkawa, Ok.
Posts: 1,977
Default Re: Cap and Comp Jet Helicoil repair
Quote:
Originally Posted by Russ/40 View Post
If the goal is a good fitting jet, i would tin the threads of the jet carefully with 50/50 solder.
Just don't tighten it too much.
The Challenge was the threads in the bowl were all but gone.
TinCup is offline   Reply With Quote