The Ford Barn - View Single Post

JM 35 Sedan · 03-31-2013, 09:45 AM

I am thinking coolant flow/engine cooling would be best with pumps in block and '37 cast iron heads with center outlets. If this engine is going in a '35-'36 passenger car with stock radiator inlets, there is a NAPA/Gates one piece top hose available that fits perfectly.

03-31-2013, 09:45 AM	#3
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: 1937 block with '36 heads I am thinking coolant flow/engine cooling would be best with pumps in block and '37 cast iron heads with center outlets. If this engine is going in a '35-'36 passenger car with stock radiator inlets, there is a NAPA/Gates one piece top hose available that fits perfectly. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*