Quote:
Originally Posted by dbtenner
Ok so here is the update: purchased a NAPA FA5 this morning and added a grounding wire to go to the frame. The width of the condenser is smaller than the one I took out. The car still won’t start up.
When you mention “check the coil” what are you referring to. I know the points and individual “coils” that go to each spark plug. I’m still leaning towards no spark. When my brother hits the starter my continuity test at each plug shows nothing.
Sent from my iPhone using Tapatalk
|
How can you check continuity at the plug? Hold the plug wire 1/4" from the head and see if you have a spark or use a spark checker.