View Single Post
Old 06-23-2018, 07:23 PM   #30
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Chasing my tail trying to get 1928 tudor running

Quote:
Originally Posted by rusted View Post
The three bolts holding the starter are not the same length! If you put a longer one in that hits the flywheel, It will act as if the engine is locked up. I would pull the starter and see if things turn in gear and go from there.
That rumor keeps getting repeated, but all 3 mounting bolts are 1" long.
Tom Wesenberg is offline   Reply With Quote