Quote:
Originally Posted by gustafson
" Valves are just as likely to stick up as down"
A valve would have to be stuck really hard in the closed position for the cam not to be able to push it up. As far as sticking open, only the relatively weak spring pressure is trying to close it, not the positive lever action of the cam
I doubt sitting for 2 years is long enough to bind up a valve in the closed position
His problem is elsewhere
|
I suppose my more than 50 years of wrenching on As should qualify me to agree with this post, but I imagine some self proclaimed experts would disagree. Oh yeah, right, I forgot, we have "real experts here" to whom I shall defer.
So, what did the problem turn out to be, anyway?