View Single Post
Old 03-29-2013, 08:25 PM   #5
Tom Endy
Senior Member
Tom Endy's Avatar
Join Date: May 2010
Location: Southern California
Posts: 2,509
Default Re: installing 31 steering column bracket on 29

Attached are a series of photos when I did my 29 coupe a number of years ago. There was another fellow that posted better photos on fordbarn when I did mine. I did a search, but could not find it.

The important thing is you have to make an adaptor bracket to mount the 31 steering column to a 28\29 car because the existing bolt holes do not line up with the 31 steering column mount. You can buy the 31 column mount hardware from Bratton's. All you need is a fabricated bracket to accommodate the holes in the 28\29 car with the 31 mount.

Tom Endy
Attached Images
File Type: jpg Dash flang holes 1.JPG (25.2 KB, 263 views)
File Type: jpg dash flange holes 2.JPG (31.1 KB, 246 views)
File Type: jpg mounted adaptor.JPG (22.6 KB, 267 views)
File Type: jpg mounted adaptor-2.JPG (23.0 KB, 244 views)
File Type: jpg later support.JPG (78.2 KB, 255 views)
File Type: jpg support install-1.JPG (31.4 KB, 286 views)
File Type: jpg support install-2.JPG (36.9 KB, 282 views)
Tom Endy is offline   Reply With Quote