[Vergil]

Originally Posted by Ol' Ron

The 270 Schnider cam is a nice cam, sounds good and pulls well over 2599. Displacement and compression make up for any low RPM losses. I like a hot cam in a street machine,if your looking for mileage buy a Preis.
Vergil, for a street engine you don't want a very thin valve and you don't really need all that flow for a street.

Thanks Ron, another note on the cam, I have advanced it a little, now the intake valve closes at 43° ABDC instead of 49°, thought it might bring the torque curve down just a little and so far I am happy with it but I didn't get to run it with the cam set straight up.

Vergil