The Ford Barn - View Single Post - Head Gasket questions and coolant in oil.

Mike V. Florida · 05-12-2015, 03:23 PM

We can spend a lot of space with all the places the water could come from.

If it were mine I would remove the head and inspect the gasket.

The engine needs to be leveled wherever it is necessary, the head or block if either is not flat you are wasting your time.

Felpro gaskets have worked fine for years. There is also the one with the silicone in it that seems to have mixed reviews, (I think the problems are not following instructions).

05-12-2015, 03:23 PM	#2
Mike V. Florida Senior Member Join Date: May 2010 Location: South Florida Posts: 14,054	Re: Head Gasket questions and coolant in oil. We can spend a lot of space with all the places the water could come from. If it were mine I would remove the head and inspect the gasket. The engine needs to be leveled wherever it is necessary, the head or block if either is not flat you are wasting your time. Felpro gaskets have worked fine for years. There is also the one with the silicone in it that seems to have mixed reviews, (I think the problems are not following instructions). __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II