The Ford Barn - View Single Post - 1948 f1 metal bed conversion for shortbed

gtdohn · 07-19-2019, 04:18 PM

Yes, I received plenty of suggestions, but not one from a person that actually used the kit.
That's what I'm looking for. If someone actually uses something, then they can be a source of opinion on such things as what came in the kit, and how was it to install, etc. I can look up companies that sell kits, but they are so badly described half of the time, you don't know what you are getting and when you call them, they have no knowledge of their product.
By the way, I am not looking for the cheapest kit, but $1,100 for a wood bed kit is just too much.

07-19-2019, 04:18 PM	#18
gtdohn Senior Member Join Date: Mar 2019 Location: Gilroy, California Posts: 103	Re: 1948 f1 metal bed conversion for shortbed Yes, I received plenty of suggestions, but not one from a person that actually used the kit. That's what I'm looking for. If someone actually uses something, then they can be a source of opinion on such things as what came in the kit, and how was it to install, etc. I can look up companies that sell kits, but they are so badly described half of the time, you don't know what you are getting and when you call them, they have no knowledge of their product. By the way, I am not looking for the cheapest kit, but $1,100 for a wood bed kit is just too much.