The Ford Barn - View Single Post

JSeery · 10-29-2019, 12:10 PM

I have seen an arrangement made up using large copper fittings. I have a photo somewhere. The OD of the copper matches the ID of the hose. It consist of an elbow, then a riser piece to the correct height to a second elbow. Short pieces of hose connect the copper fittings to the radiator and water pumps.

10-29-2019, 12:10 PM	#4
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: 1939 Pickup Radiator Help! I have seen an arrangement made up using large copper fittings. I have a photo somewhere. The OD of the copper matches the ID of the hose. It consist of an elbow, then a riser piece to the correct height to a second elbow. Short pieces of hose connect the copper fittings to the radiator and water pumps. Last edited by JSeery; 10-29-2019 at 08:17 PM.